manualshive.com logo in svg

bioscrypt V-PASS, Руководство по эксплуатации

Поделиться
Скачать
bioscrypt V-PASS Скачать руководство пользователя страница 14

A

B O U T  

V

E R I

- S

E R I E S  

P

R O D U C T S

13

© Copyright 2002, Bioscrypt Inc.  All rights reserved.

fingerprint templates are different the smaller VeriProx and VeriFlex fingerprint templates.
Please see Appendix C for further details.

About the V-Smart

Bioscrypt’s V-Smart provides all the capability of the Veriflex and includes an internal
smart card reader.  Fingerprint templates are securely stored on a smart card rather than
the reader and carried by the employee or user.  This allows for an unlimited population
of users.  The smart card is presented to the V-Smart and the template is read from the
smart card and verified against the employee’s live image.  Storing the template on the
smart card allows the V-Smart to have an unlimited user base and removes the need for
a physically-wired network.  Wiegand communication formats of up to 64 bits can also be
stored on the smart card and optionally used with a Wiegand device.

Содержание V-PASS



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды