A
B O U T
V
E R I
- S
E R I E S
P
R O D U C T S
12
© Copyright 2002, Bioscrypt Inc. All rights reserved.
About Veri-Series Products
About the VeriProx
Bioscrypt’s VeriProx combines patented fingerprint verification technology with an
industry-standard proximity card reader in a mullion-mountable case. This ensures
greater security for the card issuer and the card user. Requiring that the fingerprint of the
person seeking entry matches the identity of the cardholder eliminates access via lost or
stolen proximity cards. Suitable for both standalone and network use, the system works
with existing 26-bit proximity card infrastructures.
The unit operates in conjunction with administration software hosted on a PC. Once
installed users simply present their identification cards when entering the secure area
and then touch a fingertip to the recessed area on top of the unit. The system validates
their fingerprint against a previously enrolled template stored in flash memory.
The VeriProx system provides security features that can minimize fraud and can tolerate
changes to the user’s finger like scarring or swelling. The VeriProx returns accurate pass
and fail decisions in 99.99% of all cases.
Each VeriProx unit stores thousands of fingerprint templates, in a non-volatile memory.
Response time is less than five seconds for fingerprint enrollment and less than
1.5 seconds for fingerprint verification. The system is compact, versatile, and configured
to allow standalone, PC-connected, and multiple-unit operation.
About the VeriFlex
Bioscrypt’s VeriFlex includes all features found in the VeriProx
except
it does not include
the internal proximity card reader. External connections to Wiegand devices still exist
and allow the VeriFlex to be added to installations that already have supported Wiegand
devices installed. Whereas the VeriProx can operate as a standalone device, the
VeriFlex requires an external device (such as an external Wiegand reader or PC) that
initiates enrollment, verification, and template administration activities.
About the V-PASS
Bioscrypt’s V-PASS is similar in construction to the VeriFlex but incorporates an entirely
different biometric algorithm. Whereas the VeriProx and VeriFlex will perform a
1:1
matching verification
where an ID number is required, the V-PASS performs a searching
algorithm that will compare the user’s fingerprint with every stored template to find a
potential match. This ability removes the requirement of telling the unit the ID number to
verify. With the V-PASS, the user simply places their finger on the sensor, and a PASS /
FAIL is determined. No external or internal Wiegand input device is required. Once the
fingerprints are enrolled on the unit, the V-PASS can operate in a standalone mode. A V-
PASS can still be connected to Wiegand Input devices similar to a VeriFlex. If a
recognized Wiegand signal is received identifying an ID number, the V-PASS will perform
a simple 1:1 verification and not a searching operation. PLEASE NOTE: the V-PASS
