Unit Specifications
Overall Dimensions
The overall dimensions of the Ampulmatic-10 Liquid Filler accessory are
8”W x 16”H x 8”D (20.3
cm W X 40.6 cm H X 20.3 cm D).
Shipping Weight
The shipping weight of the Ampulmatic-10 Liquid Filler accessory is approximately 27 lbs (12.25
kg)
.
Electrical Requirements
All electrical parts are UL listed/approved. The Ampulmatic-10 Liquid Filler operates internally
on 12 VDC. This voltage can be supplied by the power transformer furnished with your unit from
a power source of from 100 to 240 VAC (50-60 Hz).
Materials of Construction
Outside Body
Powder Coated Aluminum
Fluid Path
Borosilicate Glass, PTFE, 316ss
Note: Corrosive liquids must be tested in advance of filling and sealing for compatibility with the
materials of construction of the Ampulmatic-10 base unit and its accessories. Special materials
for corrosive resistant Ampulmatic-10 models are available by request.
CAUTION: Do not operate the Ampulmatic-10 ampule sealer with corrosive liquids
that are incompatible with the materials of construction of the unit.
Operating Conditions:
Acoustic Noise: <70db(A)
Atmospheric Pressure: 760-1080mBar
Storage Temperature: Between 5°C to 40°C
Operating Temperature: Between 5°C to 40°C
Altitude: Less than 2000m
Humidity Conditions: Between 30% to 90% (non-condensing)
Country of Origin
The Ampulmatic-10 Liquid Filler accessory is manufactured by Bioscience, Inc. in the USA.
4-1