Bioscience Ampulmatic-10 Purge Gas Injector Скачать руководство пользователя страница 4

Statement of Warranty 

 

The Ampulmatic

®

-10 Liquid Filler accessory is warranted against faulty workmanship or the use of 

defective materials for a period of 365 days from the date of shipment.  This warranty is the only 

warranty made by Bioscience, Inc. (Manufacturer) and is in lieu of all other warranties, expressed 

or  implied,  except  as  to  title  and  can  be  amended  only  by  a  written  instrument  signed  by  the 

Manufacturer. The Manufacturer provides no warranty to the Customer, either express or implied 

nor  for  title.    Manufacturer  further  disclaims  any  warranty  of  merchantability  or  fitness  for  a 

particular purpose in connection with the customer’s purchase of units of any Product under this 

agreement.   The  liability of the  Manufacturer under this warranty is limited solely to replacing, 

repairing, or issuing credit (at Manufa

cturer’s discretion) for any device which is returned by the 

customer  during  the  period  provided  for  above,  provided  that  (a)  Manufacturer’s  product  is 

returned  properly  packaged  in  the  package  made  per  specifications  equal  to  or  better  than 

Manufacturer’s

 original carton specifications, (b) Manufacturer is promptly notified in writing upon 

discovery  of  such  defects  by  customer,  and  customer  obtains  return  authorization  from 
Manufacturer to ship the unit, (c) the defective unit is returned to Manufacturer, transportation 

charges prepaid by customer, (d) warranty card, with date of receipt of product and signed by the 

customer,  is  returned  to  the  Manufacturer  within  30  days  of  purchase,  and  (e)  Manufacturer’s 

examination of such unit shall disclose, to its good faith satisfaction, that such defects have not been 

caused by misuse (including the filling and/or sealing of corrosive materials), neglect, improper 

shipping or installation, repair, alteration, or accident.  In no event shall Manufacturer be liable for 
loss of profits, loss of use, or damages of any kind based upon a claim for breach of warranty. 

 

All claims under this warranty will be made directly to Manufacturer.  Faulty units are to be shipped 

prepaid  to  the  Manufacturer’s  designated  location.    Man

ufacturer  shall  prepay  transportation 

charges when repaired units are returned and bill customer unless the units are found defective 

under this warranty.  Manufacturer shall pay return freight of units found defective under warranty.  

Claims with the freight carrier for damages in shipment shall be made by the party of destination. 

 
For your records, please record:  Ampulmatic-10 Liquid Filler Serial No. _________________   

 

Complete, Detach and Return Within 30 Days of Receipt 

-------------------------------------------------------------------------------------------------------------------------------- 
 

User’s Na

me _________________________ 

User’s Sign

ature ____________________________ 

 
Title_______________________________Ship Date ________________________________ 
 
Company ___________________________ Receipt Date_______________________________ 
 
Address ____________________________ Warranty Received at Bioscience_________________ 
 
 

____________________________ Have you set up your new Liquid Filler? ____________ 

 
Phone ____________  Fax _____________  Have you operated your Liquid Filler?_____________ 
 
Liquid Filler Serial No.  _________________   
 
Comments (Sales, Delivery, Manual, Instructions) 
 

 

2-1 

Содержание Ampulmatic-10 Purge Gas Injector




















Отзывы: