6
4.2.2.
CH-100
-
CH-100
heating/cooling dry-block system ........................................................ 1 pce.
-
Transparent block lid ........................................................................................ 1 pce.
-
External power supply ...................................................................................... 1 pce.
-
Power cable ..................................................................................................... 1 pce.
-
Operating manual, Certificate .......................................................................... 1 copy
4.3.
Setup.
-
Place the unit upon even horizontal non-flammable surface at least 20 cm away
from any flammable materials;
-
Do not place any objects 40 cm behind the unit to ensure unimpeded air circulation;
-
Remove protective film from the display;
-
(Model
CH 3-150
) Plug the power cable into the socket on the rear side of the unit,
and position the unit with easy access to the power switch and plug.
-
(Model
CH-100
) Connect the external power supply and the power cable. Plug the
external power supply into the socket on the rear side of the unit and position the
unit with easy access to the power switch and plug.
4.4.
Heating or cooling block installation and replacement (model
CH 3-150
).
Caution!
Heating/cooling block surface may become very hot or cold during
the operation. Avoid touching the block or heating/cooling surfaces.
Change the blocks only at room temperature.
-
Use the extractor tool for removing blocks. Screw the tool into a threaded hole in
the middle of a heating/cooling block and lift it out. Unscrew the tool.
-
Ensure that the heater bed and the block are clean in order to ensure good thermal
contact between unit and the block, resulting in optimal temperature control
performance.
Содержание CH 3-150
Страница 1: ......
