Biosan Bio RS-24, Руководство по эксплуатации

Страница: 4 / 16

·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
Page 4
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
·
Do not operate the unit if it is faulty or has been installed incorrectly.
·
Do not use outside laboratory rooms.
· Do not place a load exceeding the maximum load value mentioned in the
Specifications section of this Manual.
BIOLOGICAL SAFETY
·
It is the user's responsibility to carry out appropriate decontamination if
hazardous material is spilt on or
penetrates into the equipment.
2 . General Information
Multi Bio RS-24 p rogrammable rotator provides: 1) orbital rotational
motion, 2) reciprocal motion, 3) vibro motion of the platform in different planes
according to the microprocessor protocol. The protocol
enables making not
only programs that include mixing motion of one particular type, but also
programs that alternate mixing motions of different types cyclically.
There are options for setting:
1) Speed and time of ordinary R
OTATIONAL
M
OTION
(360º) of the platform for a time period 0 - 250 sec,
or non-stop with the speed of 1 - 100 rpm.
2) Segment of R
ECI PRO CAL
M
OTION
when
the direction of platform rotational motion from
the vertical plane is changing in turns within
the limits of the set segment (turning angle 1 -
90º for a time period 0 - 250 sec, or non-stop);
3.1) Segment and time of V
IBRO
M
OTION
of the platform (turning angle 0 - 5º for a
time period 1 - 5 sec) run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;
3.2) P
AUSE
duration for temporary platform
motion stops (1 - 5 sec) when the vibro
motion is off (the turning angle of vibro
motion is set to zero)
run on the borders
of reciprocal motion segment. It is available
only when the reciprocal motion is ON;