Biosan Bio RS-24, Руководство по эксплуатации

Страница: 10 / 16

type (1 - 5 sec) , which is the time of pause duration. Set the angle of Vibro
type motion to zero.
5. 5 . 7. Vibro + Reciprocal Rotation
Set the speed ( 1-100 rpm) of Orbital
rotation. Set the time of Orbital rotation
to zero (OFF). Set the angle (1-90º)
and time (1 - 250 sec) of Reciprocal
motion. Set the angle (0 - 5º) and time
(1 - 5 sec) of V
ibro type motion.
Note that normally rotator performs
soft vibration (Vibro motion). However
there is a mode for hard vibration.
To perform hard vibration set the
turning angle of Reciprocal motion to
90º and the angle of V
ibro type motion
to 1º (Hard V ibro).
When w orking with the unit in vibro motion mode for long period nonstop
and using the platform with rubber clamps, choose the tubes not longer
than 7 cm from cap till bottom.
Page 10
o
1-90
1-5
1-250 OFF
o
0-5
1-100
Time (sec.)
Orbital
(rpm)
Reciprocal
(deg.)
Vibro
/ pause
o
90
o
1
OFF/1-250
1-5
1-250
Time (sec.)
Orbital
(rpm)
Reciprocal
(deg.)
Vibro
/ pause
1-100