Biosan Bio RS-24 Скачать руководство пользователя страница 3

Page 

3

1. Safety precautions

The following symbols mean

:

Caution

!

 

Make sure you have fully read and understood the present Manual 

before using the equipment. Please pay special attention to 
sections marked by this symbol.

GENERAL SAFETY

·

Use only as specified in  the operating instructions provided.

·

The unit should be saved from shocks or 

falling

.

·

The unit must be stored and transported in a horizontal position (see package 

label).

·

After transportation or storage keep the unit under room temperature for 2-3 hrs 

before connecting it to the electric circuit.

·

Use only cleaning and decontamination methods recommended by the 

manufacturer.

·

Do not make modifications to the design of the unit.

ELECTRICAL SAFETY

·

Connect only to a power supply with voltage corresponding to that on the serial 

number label.

 

·

Use only the external power supply unit provided with this product.

·

Ensure that the external power supply connector 

is

 easily accessible during use.

·

Disconnect the unit from the electric circuit before moving.

·

Turn off the unit by disconnecting the external power supply from the power 

socket.

·

If liquid penetrates into the unit, disconnect it from the external power supply unit 

and have it checked by a repair and maintenance technician.

DURING OPERATION 

·

Do not operate the unit in environments with aggressive or explosive chemical 

mixtures.

Содержание Bio RS-24

















Отзывы: