BIOS Professional 200TC, Инструкция по эксплуатации, Страница: 15 / 44

NOTE: With each upload, a new Excel file will be created. Daily downloading is
recommended.
1. Once software is installed, plug the USB cable into the BIOS monitor and
then into your PC.
USB Port
2. Click on your Start menu button, go to “All Programs”, click on “Datalogger”
3. On the bottom right corner of your PC monitor screen you will see the
Datalogger icon ( ).
4. The Datalogger icon will be grey when the monitor is not connected to the
PC. Once the monitor is connected to the PC the Datalogger icon will turn
green.
5. Right click on the icon, a menu bar will open. Click on “Start Upload”.
6. The data will start to upload from the monitor to the PC.
7. Once the upload is finished, open your “My Documents” folder. In this folder
there will be a folder named “Datalogger”. Open the “Datalogger” folder.
8. Open the Excel file named “Datalogger”. An excel document will open with a
blank template of the software sheet. A menu will open asking to Disable or
Enable Macros, click on Enable Macros.
9. A new excel document will open with the uploaded data. Ensure document is
saved before closing.
NOTE:
The Excel document will be named using the year, month, day and
time the upload was made. For example, if you uploaded the data on Dec. 12,
2007 at 3:06pm the file will be named 200712121506.xls
10. To send a copy of a log file via email, open your email program. Start a new
email message and attach the file before sending to desired recipient.
NOTE: USB icon on monitor will flash when the memory is full. To prevent
data from being deleted, upload immediately.