BIOS Professional 200TC, Инструкция по эксплуатации, Страница: 12 / 44

10.0 Display on Temperature Sensor
Each Temperature Sensor has a small LCD screen, which upon registration
displays a number. The corresponding number can be found on the monitor,
where the temperature of that sensor is displayed.
– Sensor is in sleep mode. To temporarily stop transmission from the sensor
to the monitor, press and hold the Zz button on the sensor until a beep is heard.
– Press the Zz button on sensor to mute the sensor and avoid an audio
alarm. When the sensor is set to mute, the only indication of an alarm is the red
LED light.
– When the low battery icon appears, batteries should be replaced.
11.0 Sensors and Monitor Placement
IMPORTANT: To ensure no signals are lost from sensor to monitor, make sure
that the monitor and sensors are always in an upright, vertical position.
NOTE:
To stand monitor on flat surface, use built in stand located on the back of
the unit.
For positioning using a nail, screw or hook:
1. Fasten nail, screw or hook (not included) to wall.
2. When positioning the monitor, remove rubber stopper in the wall mount hole
located at the back of the monitor.
3. Hang unit on the wall using the wall mount hole on the monitor, and/or on the
wall mount bracket included with the sensor.
For positioning using double sided strip, included (sensor only):
IMPORTANT: before positioning monitor or sensors, ensure wall surface is clean
and residue free.
1. Remove one piece of double sided tape from the sheet provided.
2. Stick the tape vertically across the center of a sensor.
3. Peel off the backing paper from the tape.
4. Position by pressing sensor firmly against the wall.
NOTE: When installing the sensors to be used for large refrigerators and/or
freezers, it is best to use the extension cord to mount the probe in the back half of
the area being monitored. Approximately half way from the floor to ceiling will give
optimal readings.
NOTE:
The sensor unit itself must be installed outside of refrigerators or freezers
for best results.
FLIP
Monitor Sensor