BIOS DVPro T10B3, Руководство пользователя, Страница: 65 / 65

DVT10B3
－
62
－
RAID-6
NORMAL
The retry mark is shown in front of
“NORMAL” case.
： －
Data in transmission error detected abortion of condition check
． －
Data read recovered by retry
！ －
Data read recovered by Rewrite and Read
？ －
Retry on Patrol operation
How to use MODE and SELECTbutton
While at READ or WRITE operation, if Retry is occurred (Drive access retry), press SELECT button to
bring up retry details
Read Retry in
CH # Err Code = x
Write Retry in
CH # Err Code = x
HRead Retry in
CH # Err Code = x
CH 0 Drive No. 0 CH 5 Drive No. 5
CH 1 Drive No. 1 CH 6 Drive No. 6
CH 2 Drive No. 2 CH 7 Drive No. 7
CH 3 Drive No. 3 CH 8 Drive No. 8
CH 4 Drive No. 4 CH 9 Drive No. 9
If there is a Drive down error on LCD, press SELECT button to see extra error information.
Channel
＃
Occur error x
「＃」
drive number,
「ｘ」
drive fault reason
Pressing MODE+SELECT twice will clear retry mark but extra error information will be shown. If same
error occurred twice or more, then the drive or host is considered as problematic.