BIOS DVPro T10B3, Руководство пользователя, Страница: 38 / 65

BIOS CORPORATION
－
35
－
If there is no need for authentication, you can forward (relay) from DVPro T10 notification by
setting up the local SMPT server. For Windows OS, you can setup IP address of DVPro T10 on
SMPT which has the RELAY function.
●
Send Test Mail
（
button
）
By clicking on
“Send Test Mail” button following the email setup, you can send a test email to the
receiver address for confirmation.
＜
A failed screen
＞
There will be
“Sending Test Mail” shown on the screen indicating the email in transmission. And the log
will record a message if the test mail was sent out. If the Send Test Main failed after retried, an error
log will be recorded.
0020: SMTP was not found
0021: Gateway was not found
0022: SMTP did not respond
It might take up to 10 minutes for the retrial if the mail could not be sent.
There might be cases which SMTP did respond but with wrong answer. We suggest trying a different
SMTP server under such situation.
2.6.5 Mail Format
The mail format is looked like below:
From: DVPro@[192.168.50.210]
To: test@bios.co.jp
Subject: Alert from DVPro T10
Alert Condition of BIOS DVProxx-xxx6 Ver.x.xxx
Serial Number= xxxxxxxx
Alert Reason = Test of Send Mail.
１）
From: Mail sender, this machine