BIOS DVPro T10B3, Руководство пользователя, Страница: 16 / 65

BIOS CORPORATION
－
13
－
RAID 6, RAID 5, RAID 3, RAID 1, RAID 0, RAID 1 Three Drive, RAID 10, Single Drive
RAID 1 Three Drive means same data is written to three drives and read might be from any drive.
RAID10 works as a pair of
‘Drive 0,1’ ‘Drive 2,3’, ‘Drive 4,5’ etc.

Drive Mode Setup
DRIVE MODE
6
Setup number of drives in used
Parameter Function Memo
DRIVE MODE 3 3 Disks
（
DATA
＋
PARITY
）
Mode
DRIVE MODE 4 4 Disks
（
DATA
＋
PARITY
）
Mode
DRIVE MODE 5 5 Disks
（
DATA
＋
PARITY
）
Mode
DRIVE MODE 6 6 Disks
（
DATA
＋
PARITY
）
Mode
DRIVE MODE 7 Below is for 10 drive model
DRIVE MODE 8
DRIVE MODE 9
DRIVE MODE 10 Default

Sector Size Setup
SECTOR SIZE
512B
512B, 4KB
This is to setup sector size of disk. For new Advanced Format HDD, you need to set up 4KB for better
performance on sequential Write access. Please check with your drive vendor for the sector size.

LUN Size Setup
LUN SIZE
Max 2TB
Parameter Function Memo
LUN SIZE
FULL
Configure all capacities to Single LUN size.
Depend on host operating system, LUN over 2TB size might not
be recognized.
LUN SIZE
MAX 2TB
One LUN only and size is set to 2TB as some Operating
systems only support less than 2TB LUN size
LUN SIZE
1/2 DIVISION
Two LUNs each with half of total capacities will be assigned
LUN SIZE
64GB + ALL
Set up one LUN as 64GB and the rest of all as 2
nd
LUN (or 2
nd
LUN maximum is 2TB.)