BIOS AP DVT10U3, Руководство пользователя

Страница: 19 / 62

DVT10U3
－
16
－
2.5.2 Parameter Confirmation
Sometimes you will need to read and confirm the setup of current parameters then you can press both
MODE and SELECT button on the front at the same time for this. Firmware version will be shown at the
beginning and the parameter can be rolled among by pushing MODE button.
< Factory Default Setting > this is a convenient form for customer to record all parameters.
Parameter Default or Pre-set Notes
Firmware Firm ware is Ver. x.xxx Information only for reference
Vendor ID Vender ID is BIOS Information only for reference
Model No Product ID is DVT10T2 Information only for reference
Serial No Serial No ID xxxxxxxx Information only for reference
IP Address 192.168.50.210
Address Mask 255.255.255.0
RAID Mode RAID MODE RAID-6
RAID-10 / RAID-6 / RAID-0 / RAID-3 / RAID-5
DRIVE Mode DRIVE MODE 10 3, 4, 5, 6, 7, 8, 9, 10*
Disk Size DISK size Test1GB/1TB /2TB/3TB/4TB/5TB/6TB/7TB/8TB
Recovery Wait
Time
0.1 Sec 0/ 0.1/1/10 Sec, 2Min/5 Min/10 Min/20 Min
System Patrol 30Days/Cycle
10S, 5S, 3S, 5/10/20 DAYS/CYCLE
Fan Speed Temp 45 Deg C 20, 30, 35, 40, 45, 50, 55, 60 Deg C