BIOS AP DVT10U3, Руководство пользователя

Страница: 14 / 62

BIOS AP Inc.
－
11
－
POWER DOWN
PLEASE
！
You can then shut down and turn the storage back on.
If you power down the storage before saving operation, modified parameters will be ignored.
● Save parameters
①
MODE
＋
SELECT Button (Save)
②
Shutdown and power on (New parameters effective)
● Cancel the change Power off while doing change
If any of Critical Parameters (RAID mode, Disk size, Drive mode) was changed, hold down the
Mode button at power on at the same time for system initialization. (This action will set the device to
its normal status and abandon Rebuild operation of failed disks if any.) After power on, a
“RAID-n
NORMAL
” will be displayed on LCD.
RAID-6
NORMAL
2.3. Front Panel LCD Toggle rolling setup flowchart
ARRAY PARAMETERS
SETTING!
：
Initial Display
↓
Disk Size Setup
：
Hard Disk Capacity Setup
↓
RAID MODE Setup
：
RAID Mode Setup
↓
DRIVE MODE Setup
：
Number of Drive Setup
↓
RECOVERY MODE Setup
：
Priority of RAID Rebuild
↓
System Patrol MODE
Setup
：
HDD disk surface scan schedule
↓
Fan Speed Control Setup
：
Fan Speed Control set up
2.4. Meanings of Parameters
This section explains each RAID parameter and its associated function.
Ps. please record parameters from change. You can follow the method described on