BIOS AP DVT10U3, Руководство пользователя

Страница: 10 / 62

BIOS AP Inc.
－
7
－
No Name Function Explanation
①
POWER Button Power ON /OFF Switch
②
HDD Access / FAIL
Bi-color LED
Blue On: Drive asserted, Flash upon access;
Red ON: indicates an error
When
「
RAID-x RECOVERING 0%
」
shown on LCD, the FAIL LED on
means the HDD is under rebuilding
③
POWER LED Blue:Power ON LED indicator
④
ACCESS LED Green:Controller Access LED indicator
⑤
FAIL LED Red: A controller error LED indicator
⑥
MODE Button
1
）
Parameter Initialization(Power on Initialization)
2
）
Configure parameters
「
See Chapter 2
」
3
）
Stop buzzer alarm(Buzzer stopped immediately by pushing one
time)
⑦
SELECT Button Setup Parameter
⑧
LCD Display
Message display screen. Show status of the system
and parameters while doing configuration
⑨
Power Input AC Inlet (100V-220V auto switching)
⑩
Ethernet Port RJ45 Fast Ethernet port for Web GUI management
⑪
USB3.1 Connector USB3.1 Host connector (Type C)
⑫
Init Button Reserved rear Button for Initialization
⑬
Fan Module Fan 1
⑭
Fan Module Fan 2
⑮
Drive Module Disk Drive module 0 (to 9).Upper left one is number 0, and right is 1