7
the test materials have been removed before cleaning
Qsep
™ Series
.
11.
User can also use N
2
gas as an air source to insure the air quality and prevent
damages to the devices caused by dirty air.
12.
Make sure to press the plastic connection ring before pulling the air tube out
from the back of the instrument.
13.
Release the condensation water in the external air pump periodically and
check water level before each use to avoid the mist damage the devices of
Qsep
™ Series.
14.
To cut off the power please disconnect the power plug.
15.
Please clean the instrument with dry cloth. For other maintenance, please
contact local distributor.
16.
Please use the MAINS power cord within adequate rating.
17.
The conditions of transportation and storage: Temperature -30 to +60°C
Humidity 20 to 80% RH, non-condensing.
*Note
: Strongly suggest performing this step whenever you start to operate
Qsep
™
Series .
Warning:
Qsep
400
™
are high-voltage Multiple-channel electrophoresis system.
Please follow the operation manual and laboratory safety guidelines for system
operation. Do not remove covers. For operation and safety questions, please
contact BiOptic Inc. at the official website or with your local BiOptic representatives.
