Bionet Cardio 7, Руководство по обслуживанию

Страница: 20 / 79

C7SM-1.01
20/79
Service Manual of Cardio 7
2-2. Wave Printing
Problem Solution
1-1. The wave pattern changes from the flat
line on the left to the wave forms on the
right.
1. If the normal wave patterns show up to
the right of chart as shown in
problem1, 2, diagnosis output print too
early.
2. It takes some time to show the normal
wave patterns.
3. The normal wave patterns will show if
output is requested after the system is
stabilized by showing the HR variance
of ±5 on the LCD display.
4. Check connection of the limbs
electrode and the chest electrode to
the body parts.
5. If used on the dry skin or in the winter
season, connectivity may be degraded.
In that case, used water or ECG gel.
The electrode must be washed after
using ECG gel. Otherwise, the
electrode will be rusted and corroded.
1-2. Some wave patterns are not shown in
V1~6.
* Connection location of the limbs
electrode and the chest electrode
2. The diagnosis is not shown in print.
1. Press the menu key, showing the
overlapped circle and triangle, at the
bottom of the Keypad.
2. Press the right arrow button twice to
select PRN and then press the menu key.
3. Press the left arrow button once to select
DIAG and then press the menu key.
4. Press ESC key from the menu to enter
the basic display and then press '0' to
printout.