11
www.bioneer.com
BQ-042-101-13
Revision :0 (2018-07-05)
AccuLoader
™
VI.
Unpacking and Installation
1.
Checking the installation environment
1)
Check the environmental requirements for installation from
“IV.
Warnings and Cautions for Safety
”
2.
Unpacking and installing
Pay attention to the details below for unpacking and installation for your safety.
▪
Check the location where you can hold the instrument comfortably.
1)
Unpacking
(Materials needed: box knife, scissors, or utility knife and gloves, etc.)
a)
Cut off the packing straps using scissors, etc.
b)
Take out the box of accessories from the upper box of the package.
c)
Separate the protection cover from the package and take out the instrument.
2)
Checking the accessories and the consumables
Check the composition part of
“
V. Product Description
”
.
If any component is not included or damaged, contact your local distributor or BIONEER.
3)
Installing the instrument
a)
Lift the instrument from the package and move it to the desired location.
b)
Remove the packaging and check if there is any damage to the instrument.
If the instrument is damaged, record the condition and area of the damage and contact your local
distributor.
3.
Checking the operation
1)
Connect the adapter to the adapter jack at the back of the
instrument and electrical outlet.
