ENGLISH
CONGRATULATIONS!
You have just acquired one of the finest heaters on the market today.
This heater has been designed using the latest in technology. With normal
care and maintenance, your
Fan Heater
will provide years of
satisfactory performance.
READ AND RETAIN THE FOLLOWING FOR FUTURE REFERENCE.
Note: Before reading these instructions, please unfold the back page for the
corresponding illustrations.
GENERAL DESCRIPTION
A) Air Inlet Opening
B) Air Outlet Opening
C) Mode control
D) Thermostat
E) Carry handle (not shown)
F) Cord wrap (not shown)
G) Power light
H) Heat Logic (Timer)
IMPORTANT SAFEGUARDS
l
Before connecting the appliance, check that the voltage indicated on the
rating
plate corresponds to the mains voltage in your home/office.
Read these instructions carefully, in conjunction with the illustrations before
using the appliance.
l
When using electrical appliances, basic precautions should
ALWAYS
to reduce the risk of fire, electric shock or injury to persons.
l
The appliance is double insulated and need not to be connected to an earthed
mains outlet.
. Avoid the use of an extension cord because the extension cord may overheat
and cause a risk of fire.
l
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent in order to avoid hazard.
l
Allow a safe area around the heater away from furniture or other objects:
at least 50 cm from the top and sides and 120 cm at the front.
l
Do NOT use the heater in rooms with explosive gas (e.g. petrol) or while using
inflammable glue or solvent (e.g. when gluing or varnishing parquet floors,
PVC etc)
. Extra caution is necessary when the heater is used near children or whenever
it is left unattended.
l
Do
NOT
insert any objects into the heater.
. Attention: this heater
is
hot when
in
use.
. Keep the main cord at a safe distance from the inlet and outlet openings.
. Prevent overheating of the appliance by keeping the air inlet
openings
free: do
NOT
hang anything in front of it or above it. Check the
from
time to time for accumulated dust. If overheating should occur, the built-in
overheating safety device will switch
off the appliance.
4
Содержание B435BR
Страница 2: ... i J B435BR fig 2 ...
