Page 7 v3.01.22
Mount the
Binocular
Eyepiece Head
(See page 10 for video only setup using no
binocular vew head or eyepeices.)
Remove the lens
caps from the
binocular head and
install the 10X FN 20
eyepiece oculars
with rubber eyecups.
Note that the oculars just slide right
down into the hole.
If desired you can screw the supplied
clamping screws into the tiny screw
holes on the ocular barrel to hold
them in place.
The rubber eyecups can be unfolded
for normal viewing as shown here on
the left eyepiece or folded down as
shown on the right eyepiece when
wearing glasses.
The eyepiece tube assembly can be
pulled apart as well as tilted to adjust
for your own eyes.
The left eyepiece tube has a diopter adjustment. In use, you would focus the
microscope viewing the right eye first, then adjust the diopter to focus the left.
The set screw to hold the head in place
is directly in front and below the head.
