Page 8 v3.01.22
Plug in the AC adapter for the
camera to DC12V.
Plug the mouse into the USB
port.
Plug one end of the HDMI cable
into the camera slot marked HDMI
and the other end into your HDTV
HDMI input.
The HDMI cable will have
ends as shown here.
NOTE:
Computer HDMI
slots are OUTPUT slots for
monitors and NOT input slots
for cameras.
DO NOT plug
your camera HDMI cable
into a computer HDMI slot.
Example of a HDTV input.
The best imaging will be on a HDTV
with 1920 x 1080 resolution.
To use a computer/laptop for image save/capture/record:
Plug the WIFI chip into
the camera’s WiFi/USB socket. Turn on the camera and go to your computer’s WIFI
settings to view available networks. Find BIOMEDXCAM and connect using password
12345678. The camera will now be able to be found via the camera’s software (which
must also be installed on the computer/laptop.)
Here is a 24”
HDTV on a desk
stand to raise it
off the desk. Up
to 32” size can
be mounted in
this fashion.
