Detecting and Capturing Tag IDs
18
IS1001 Reader User Manual
•
Optional BLE Data Logger Board can be used to store tag data on its extended flash
memory. See BLE Data Logger User Manual for details on collecting data.
Tag Detection Counter
The tag detection counter shows the number of tag IDs that have been detected since the IS1001
reader was powered on or since the counter was reset.
•
The tag counter behavior is configured using the
Set Detection Counter
setting. See the
DCS
command in the
IS1001 Reader Commands
section beginning on page 28
•
To view the number of tag detections, generate a full status report (see page 39).
Tag Memory Counter
The tag memory counter shows the number of tag IDs stored in IS1001 reader internal memory.
To view this counter, generate a full status report (see page 39).
Downloading Tag IDs from IS1001 Reader Memory
To download tag IDs and short status reports that are stored in IS1001 reader
’s internal memory,
use the
MED
command. The data will be sent only to the port that initiated the
MED
command.
