Biomark IS1001 Скачать руководство пользователя | Manualshive

Страница: 2 / 65

background image

Copyright and Trademarks

ii

IS1001 Reader User Manual

Copyright

© Copyright 2019 Biomark, Inc. All rights reserved. This manual contains valuable proprietary

information. It should not be published, copied, or communicated to any person without prior

authorization from Biomark, Inc.

Trademarks

IS1001, IS1001-12V, Fastag, BioTherm, BioTerm and BioStat are trademarks of Biomark, Inc.

Lantronix DeviceInstaller is a trademark of Lantronix, Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

All other trademarks, trade names, or images mentioned herein belong to their respective

owners.

Document History

Release Date

Doc Revision

Firmware Version

Comments

May, 2014

1

1.4.0 (2.4.0)

Original release of this manual.

October, 2014

2

1.4.5 (2.4.5)

Updated release of this manual.

December, 2014

3

1.4.5 (2.4.5)

Updated Data Logger Board Operation section.

July, 2015

4

1.5.2 (2.5.2)

Updated Synchronization section.

April, 2016

5

1.6.0 (2.6.0)

Updated list of commands and reports to include
changes from firmware v1.6.0 release.

September, 2016

6

1.6.1 (2.6.1)

Added Over-Temperature Protection mechanism
description and updated list of commands and
reports to include Reader Idling Time setting.

January, 2017

7

1.6.1 (2.6.1)

Updated Data Logger Board Operation section.
Removed Using BioTerm and BioStat section.
Updated links and screenshots.

March, 2017

8

1.6.2 (2.6.2)

Updated list of commands to include changes from
firmware v1.6.2 release.

July, 2017

9

1.6.3 (2.6.3)

Updated list of commands to include changes from
firmware v1.6.3 release.

June, 2019

10

1.7.0 (2.7.0)

Updated functionalities and list of commands to
include changes from firmware v1.7.0 release.
Removed USB Data Logger Board Operation
section. Added BLE Data Logger Board description.

READ THROUGH THIS ENTIRE MANUAL BEFORE INSTALLING AND OPERATING IS1001
OR IS1001-12V READER. FOLLOW ALL STEPS EXACTLY. USING IS1001 OR IS1001-12V
READER IN A MANNER FOR WHICH IT WAS NOT DESIGNED MAY IMPAIR THE SAFETY
FEATURES BUILT IN BY THE MANUFACTURER.

Safety Symbols

Indicates care should be taken to avoid physical harm. Only qualified
service personnel should access the internal components of IS1001 or
IS1001-12V reader.

«
1
2
3
4
...
»

Содержание IS1001


































































Отзывы:

Нет отзывов

Похожие инструкции для IS1001

Бренд: Accu-Sort Страницы: 102

Бренд: Hand Held Products Страницы: 20

Бренд: Panasonic Страницы: 118

CQRX400U - AUTO RADIO/CD/MP3 DECK

Бренд: Panasonic Страницы: 18

CQRX400U - AUTO RADIO/CD/MP3 DECK

Бренд: Panasonic Страницы: 24

Бренд: 3nStar Страницы: 51

IMAGETEAM 3800i

Бренд: Hand Held Products Страницы: 32

Бренд: Magtek Страницы: 2

Бренд: Geotech Страницы: 19

Бренд: Ingenico Страницы: 4

Бренд: Pro2 Страницы: 24

855-S1610040400

Бренд: ddm hopt+schuler Страницы: 25

Бренд: Edimax Страницы: 70

Бренд: PowerBass Страницы: 12

Бренд: Climax Technology Страницы: 4

Бренд: Rehan Electronics Страницы: 2

PISO-CAN-FD Series

Бренд: ICP DAS USA Страницы: 88

Бренд: CEMO Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды