User Manual Smart Storage Agitator 30
Version
: 1.0
Validation date of the manual: 01/08/2021
26 of 29
6
First Level Maintenance
This chapter describes the first-level failures, which you can meet when using the SST-A30.
LED Light Status
Actions to be taken
The calculator has the
ORANGE
LED OFF
The battery is not charging and
potentially discharged.
1. Make sure the calculator is
correctly powered.
2. Contact Biolog-id support.
The calculator has the
GREEN
LED OFF & RED LED ON steady
Hardware failure or network
disconnection.
1. Check connection to ethernet
cable and/or reset network switch
device.
2. Change for maintenance mode
and then restart the calculator.
3. Contact Biolog-id support.
The calculator has the
GREEN &
RED LED ON steady
Software crashed.
1. Change for maintenance mode
and then restart the calculator.
2. Contact Biolog-id support
The drawer satellite has
ORANGE LED ON steady
An error occurs while
reading/writing an RFID chip
with no hardware failure
identified.
Moving the bags to another location
and try again.
The satellite has
RED LED ON
steady
Hardware failure.
Note: There is potentially no
traceability at the location
where the indicator is red.
1. Move the bags to a functional
drawer.
2. Satellite has become loose. Push
satellite back into place.
3. Change for maintenance mode
and then restart the calculator.
4. Contact Biolog-id support
The satellite has the
LED OFF
Hardware OFF or failure.
1. Move the bags to a functional
drawer.
2. Check that the satellite is well
connected.
3. Make sure the calculator is
correctly powered.
4. Change for maintenance mode
and then restart the calculator.
5. Contact Biolog-id support.
In case of fault, the RFID traceability can be interrupted. This interruption is referenced in the
product event log.
