Veterinary monitor user’s manual
Chapter 2-3
(including performance check and safety check) to verify the instrument can work in a
safe and proper condition and it is safe to the medical personnel and the patient and has
met the accuracy required by clinical use.
Caution: The monitor does not contain any parts for self-repair by users. The
repair of the instrument must be conducted by the technical personnel been
authorized by manufacturer.
2.2 Some important notes for safety
PATIENT NUMBER
The monitor can only be applied to one patient at one time.
INTERFERENCE
Do not use cellular phone in the vicinity of this equipment. High level of
electromagnetic radiation emitted from such devices may result in strong interference with
the monitor performance.
ACCIDENTAL SPILLS
To avoid electric shock or device malfunction, liquids must not be allowed to enter the
device. If liquids have entered the device, take it out of service and have it checked by a
service technician before it is used again.
ACCURACY
If the accuracy of any value displayed on the monitor or printed on a printout paper is
questionable, determine the patient’s vital signs by alternative means. Verify that all
equipment is working correctly.
ALARMS
Do not rely exclusively on the audible alarm system for patient monitoring.
Adjustment of alarm volume to a low level or off during patient monitoring may result in a
hazard to the patient. Remember that the most reliable method of patient monitoring
combines close personal surveillance and correct operation of monitoring equipment.
The functions of the alarm system for monitoring the patient must be verified at
regular intervals.
BEFORE USE
Before putting the system into operation, please visually inspect all connecting cables
for signs of damage. Damaged cables and connectors must be replaced immediately.
Before using the system, the operator must verify that it is in correct working order
and operating condition.
Periodically, and whenever the integrity of the product is in doubt, test all functions.
CABLES
Route all cables away from patient’s throat to avoid possible strangulation.
