Veterinary monitor user’s manual
Chapter 1-9
FREEZE
/RECORD
Switching type button
Freeze (or defreeze)
the waveforms
/Record the real-time
waveforms
Press this button in 2 seconds to freeze waveform,
press again to defreeze waveform.
Press this button over 2 seconds can start real-time
recording.
In case the real-time recording is underway, pressing
this button will terminate real-time recording.
SUSPEND
/SILENCE
Switching type button
Suspend the sounding
of Alarm
/Close the sounding of
Alarm
Press this button in 2 seconds to make the monitor
alarm paused or cancel the pause.
Press this button over 2 seconds can silence the
monitor’s audio system or cancel the silence.
NIBP
/STAT
Switching type button
Begin (or Stop) the
measurement of NIBP
/Begin the STAT
Press this button in 2 seconds to start or stop the NIBP
measurement.
Press this button over 2 seconds to make NIBP module
working at STAT measurement mode and perform
continuous NIBP measurement within 5 minutes.
MENU
Menu
Press this button to display menu option.
1.6.2 Basic Operations
Fig. 1-6-2 Flow chart of basic operations
Note: The system menu is located at the left bottom corner. By operating the
Trim Knob in the above flow chart, select the
option
s or make them spring out, and
for detailed item selection, please refer to Chapter 4.
Turn the Trim Knob to select
the item or soft button on the
screen
Press
MAIN
button to
return to main screen
Perform the
operation
Press the Trim Knob to
confirm selection
