Biohit Midi Plus, Инструкция по эксплуатации

Страница: 9 / 16

7
6.3. Aspiration
1. Select a speed and fi ll the pipet by pressing the aspirating button. Fill
the pipet just above the desired level.
2. Remove the pipet from the sample container by drawing it up against
the inside wall of the container.
3. Adjust the volume of the sample by pressing the dispensing button until
the meniscus is at the required level.
6.4. Dispensing
The Midi Plus offers two different dispensig modes:
1. If the dispensing button is pressed only up to a point where a check can
be felt, the dispensing function will be based on the force of gravity and
the liquid will simply fl ow out.
2. Pressing the dispensing button further down engages the motor and
activates the blow-out function.
Note: Finger pressure can be varied to fi ne-tune the speed within each
mode.
6.5. Other pipetting recommendations
• Use the instrument within the limits of its chemical resistance.
• Never use with solvents the vapours of which are incompatible with the
MidiPlus materials.
• Never use with highly fl ammable liquids.
• Observe the reagent manufacturer’s safety information.
• Never use the instrument in an atmosphere with a danger of
explosion.
• Never use force with the Midi Plus.
• Should the instrument fail to function properly, stop pipetting and check
the Trouble Shooting section.
• Use only the spare parts and accessories recommended by the
manufacturer.
• Operational and storage temper10°C to +35°C.