5061-084-REV-1
LIGHTWAVE 3 & 3+ SPECTROPHOTOMETERS USER’S MANUAL
29
USER INTERFACE
Step 8
Proceed to the measurement screen by selecting
“OK” using the confirm key.
OR
Return to the wavelengths screen by selecting
“Back” using the escape key.
Step 10
Replace the previous sample with a test sample then
take a sample measurement using the confirm key.
Repeat for all samples.
WARNING!
Previous measurements cannot be recalled so
should be printed or output to a USB flash drive be-
fore any subsequent samples are measured.
Step 9
Insert the reference sample then take a reference
measurement using the reference key.
The acquired reference sample baseline will be
applied to all subsequent sample measurements.
Results
The results are displayed on the screen.
Return to the Applications screen using the escape key OR display the options menu using the options key
(see the “Additional Options” section).
