Biobase BK-S360, Руководство пользователя

Страница: 22 / 36

20
Step 6,Print curve
Press to print curve and data sheet.
Step 7, Save and Open
After scan, press to save curve, parameters and data sheet, press numeric key to input file
name, to save. to open stored file. , to choose file, to
open.
(4) Multi-Wavelength Test
Step 1, Go into multi-wavelength test interface
In the main menu, press numeric key to choose “MULTWL”. (Fig. 4-10)
Fig. 4-10
Step 2, Setup
Press , to set up test mode, press , to choose Trans. and Abs., to
confirm.
Press numeric key to set up no. of wavelength, can set up 8 wavelengths at most, choose the
wavelength no. under your choice.
Press numeric key to set up wavelength, then key to confirm.
After finished, press to start testing.
Step 3,Calibrate 100%T/0Abs
Press the sample in the light path, according to notice, press to calibrate 100%T/0Abs.
Step 4, Data Test
Place the Reference Sample in the light path,press to test sample, results will be displayed
in the data sheet. (Fig. 4-11)
Step 5, Save Data