Biobase BK-S360, Руководство пользователя

Страница: 18 / 36

16
4) Set Standard Sample. According to the notice, input the standard sample concentration (Fig.
4-7), to confirm, press , to select the value. After finishing inputting
concentration, press to enter Abs. INPUT, the method is same as inputting concentration.
Then press to enter curve picture, press again to enter quantitative data sheet
to start test.
5) Calibrate 100%T/0Abs.
Put the Reference Sample in the light path and press to
calibrate 100%T/0Abs.
6) Test Sample.
Put the test sample in the light path, press to read value.
Method 3
：
Coefficient method (Input Regression Equation)
1) Quantitative Method. Press , , to select coefficient method (PARAM).
toconfirm.
2) Set Parameter.
According to the menu options, press numeric key to set up fitting method,
wavelength method, units and room, press to confirm, then press to enter,
input wavelength, photometry coefficient K1 and intercept K0 (Linear Fit) to confirm.
3) Sample Test. Press to enter quantitative data sheet. Fig. 4-6
Fig. 4-6