Biobase BK-AutoHS96, Руководство пользователя

Страница: 38 / 55

37
Figure 4-7 96-well deep well plate loading
●
Load 1000µL tips
As shown in Figure 4-8:
1
）
Draw out the drawer where the 1000µL tip carrier is located;
2
）
Check whether the tip carrier has a plate rack that was not removed in the
previous experiment,if so, please remove it before installation.
3
）
The tip is taken out of the packing box with the arc notch on the plate rack
aligned with the cylindrical pin on the tip carrier, and the board rack is clamped
between the two elastic pieces, so that the lower plane of the board rack and the
upper plane of the carrier are stuckon.
4
）
Load other 1000µL tips according to experimental needs;
5
）
Push the tip carrier drawer back so that the drawer is on
the stop block; 6
）
Check that the drawer is pushed in place.
Figure 4-8 1000µL tip loading (one step method)
●
Load 200µL tips
As shown in Figure 4-9: