Biobase BK-AutoHS96, Руководство пользователя

Страница: 25 / 55

24
blocking plate, wrap and place it in a proper position;
5) Assemble the outer joint of the duct to the original position of the duct blocking plate;
6) Measure the required length of the air duct according to the position of the instrument,
connect the air duct to the union joint of air duct, tighten the joint with the hoop;
7) Move the instrument to the selected place;
8) Open the safety door of the upper cabinet and place the horizontal ruler on the platform;
open the two doors of the lower cabinet and adjust the height of the foot cup at the screw
hole of the foot cup with the screw cup tool and ratchet wrench until the foot cup holds the
entire instrument up, then observe the horizontal ruler and adjust the foot screw to make
instrument level properly in both X and Y directions
9) Lead the air duct to outdoor and fix it;
10) Check the appearance and moving parts of the instrument, gently wipe the dirt and dust on
the moving rail with a clean cloth strip, and add lubricants in accordance with maintenance
requirements regularly;
11) Connect the power cable;
12) Power on, enter the control software, andi instrument self-check begins.