manualshive.com logo in svg

BIO RAD 145-1001, Инструкция по эксплуатации

Поделиться
Скачать
BIO RAD 145-1001 Скачать руководство пользователя страница 86

76 |

S3 Cell Sorter Instruction Manual

76 |

7.8 Quality Control Reports

Two different reports are available to track the daily performance of the S3 system. One is the 
daily QC report which will show pass/fail and droplet information for the selected day (Figure 84). 
Past days can be viewed using the date select option. If QC has been run multiple times in a given 
day, select the daily QC report of interest from the Time dropdown list. To open the FCS file for the 
QC data shown in the report, select the 

Open FCS File

 button at the bottom of the report. This 

report may also be printed if desired.

7.7 Printing

Print and print preview buttons are available in the File dropdown menu and on the Setup 
and Maintenance tab (Figure 83). Use the print preview function to move histograms and 
density plots in your print layout. Regions can also be modified in this view and will apply to 
the protocol displayed. Once arranged, click the print button to bring up the print dialog where 
the printer and paper may be selected. Sort statistics, filter configuration, annotations, and 
compensation matrix may also be printed on the page. Select the desired print options on the 
Setup and Maintenance tab.

Fig. 84. Daily QC report.

Fig. 83. Printing options available.

Содержание 145-1001

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды