manualshive.com logo in svg

BIO RAD 145-1001, Инструкция по эксплуатации

Поделиться
Скачать
BIO RAD 145-1001 Скачать руководство пользователя страница 44

34 |

S3 Cell Sorter Instruction Manual

34 |

IMPORTANT!

 

 

 

n

 When handling sheath fluid and DI water containers, minimize air exposure to help 
avoid contamination 

 

n

 While transferring cap assemblies to a new container, avoid touching the 
assembly to the outside surfaces of the containers. If it is necessary to place the 
cap assembly down, only use pre-sterilized surfaces 

 

n

Treat all waste as bio-hazardous for safety

4.2 Logging In

To use the S3 system, the ProSort software is required.  The software is preinstalled on the 
computer that came with the instrument.  
1.  Double click the ProSort software icon located on the desktop.
2.  Log into the ProSort software.

Fig. 30. Login window.

Fig. 29. Bulk fluidics with sheath fluid components noted. 

Sheath fluid cap assembly

Sheath fluid container

Quick disconnect

Note:

 If the system has been scheduled for an automatic startup, a startup counter will be visible in  

the Login window (Figure 31). Please refer to Chapter 9, Automatic Startup, for startup options. 

Содержание 145-1001

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды