
EN - 11
5 Putting into operation
BRS-CC
5.3 DAV wire cutting device
See Fig. 5 Putting into operation on page EN-10
1
With the free wire end, move the torch into the cutting area of the wire cutter so that the wire has contact
with the fixed jaws and the gas nozzle is positioned directly over the cutter
2
Program the positions and commands as described in the flow chart.
5.4 Fastening the prism
1
Insert the prism
from above.
2
Screw in the cylinder head screw
.
5.5 Mounting the milling cutter
1
Put the milling cutter
in the clamping device
2
Secure the milling cutter
by means of tools
.
NOTE
Inflowing compressed air sucks in the anti-spatter fluid and mixes it with the compressed air flow (Venturi
principle). Recommended waiting time: approx. 1 sec.
1
Clamping device
2
Prism
3
Cylinder head screw
Fig. 6
Fastening the prism
1
2
3
1
Clamping device
2
Milling cutter
3
Tool
Fig. 7
Mounting the milling cutter
1
2
3
NOTE
• Use only tools with a suitable width across flats when changing the milling cutter.
Milling cutter seat - width 27, milling cutter - width 17.
Содержание BRS-CC
