BinTec X4100, Руководство по установке

Страница: 29 / 36

X4100/200/300 Installation 29
Equipping an Expansion Card with a Resource Card(s)
2
Figure 2-5: Resource card with digital modems with BRI card
➤
Mount the spacer pins (if not pre-assembled) on the expansion card (see
figure 2-5, page 29 ), if you have not yet done so: Place a washer from
above onto the corresponding Phillips screw, fix the screw from below up
through the expansion card, and then mount the spacer pins.
➤
Connect the resource card from above onto the connector.
➤
Fasten the resource card by fixing the included screws into the spacer pins.
1 Connector 4 Screws
2 Resource card for encryption
and compression (optional) 5 Resource card with digital
modems
3 Spacer pins 6 ISDN BRI interfaces
1
2
3
3
4
4
5
6
6
6