BinTec BinGO Plus, Начало работы

Страница: 31 / 34

C
ONFIGURATION
25
IP Partner Configuration
Select the [ IP > ] submenu and configure the IP parameters
for this WAN partner. Depending on whether you are us-
ing a transfer network, enter the IP Network address and
netmask
1
for your WAN Partner.
Select [ SAVE ] twice, and then [ EXIT ] to return to Setup
Tool’s main menu.
IP Configuration
From the main menu select [ IP ]. From the submenus
which are displayed select [ Routing ] . This menu displays
a list of routes known to the BinGO!. Initially, the list will
be empty. Select [
ADD ] to create a new default route. Your
display will be similar to the menu shown below.
In the Route Type field, select “Default route ”.
In the Network field select the appropriate entry (using
the spacebar) to specify whether the default route should
be over the LAN or WAN. For WAN routes, select the ap-
1. If you are using a standard netmask (e.g. 255.255.255.0), you can
leave this field empty.
BinGO! Plus/Pro Setup Tool BinTec Communications AG
[WAN][ADD][IP]: IP Configuration (partnerbrick) mybingo
IP Transit Network no
Partner’s LAN IP Address 200.1.1.0
Partner’s LAN Netmask 255.255.255.0
SAVE CANCEL
Enter IP address (a.b.c.d or resolvable hostname)