BinTec BinGO Plus, Начало работы

Страница: 27 / 34

C
ONFIGURATION
21
Remote TAPI Server Port
To disable Remote CAPI go to the [ PABX ] [ Static Settings ]
menu and set the Remote TAPI Server Port to 0 (the default
value is 2663).
Setting up the LAN Interface
Select [ CM-, Ethernet ] to configure your ethernet interface.
In the following menu you will need to enter the IP ad-
dress, local netmask
1
, and type of encapsulation to use on
your BRICK. For now, you can select Ethernet II encapsu-
lation.
The settings for our example setup on page 12 are
shown below.
Once your entries are correct, select [ SAVE ].
1. If you are using a standard netmask (e.g. 255.255.255.0), you can
leave this field empty.
BinGO! Plus/Pro Setup Tool BinTec Communications AG
[LAN]: Configure Ethernet Interface mybingo
IP-Configuration
local IP-Number 199.1.1.2
local Netmask 255.255.255.0
Encapsulation Ethernet II
IPX-Configuration
local IPX-NetNumber 0
Encapsulation none
Bridging enabled
Advanced Settings >
SAVE CANCEL
Enter IP address (a.b.c.d or resolvable hostname)