BinTec BinGO Plus, Начало работы

Страница: 14 / 34

B
IN
GO! P
LUS
/P
ROFESSIONAL
8
Also note that the once the rooter is up, the system may
be accessed via the ISDN using the factory-set passwords.
Changing the default passwords is described on page 18.
Also make sure the LAN switch on the underside of your
BinGO! is set to the correct position (see page 6).
After 4 seconds, the system then switches into Normal
Operation Mode . During normal operation, the front
panel indicators display status information as follows.
LED State Meaning
MSG On
BinGO! Professional only.
A facsimile is stored in the fax storage.
LAN On
LAN activity: Packet being sent via
Ethernet.
L1, L2 On
Data transmission on B-Channel 1 (L1)
or B-Channel 2 (L2).
ERR
On
(con-
stant)
Error:
The LAN cabling is not connected.or
the LAN switch is in the wrong position.
☞
!