BinTec BinGO Plus, Начало работы

Страница: 24 / 34

B
IN
GO! P
LUS
/P
ROFESSIONAL
18
System
Select [ System ] from the main menu. The only required en-
tries at this time are the first two fields ( System Name and
Local PPP ID ); this information will be used as the
BRICK’s hostname and PPP ID. With the exception of the
admin , read , and write Password/Community fields, the
other fields are not required and can be edited later. The
SNMP Community fields define the passwords that are
required for logging into your BinGO! via the network.
You can, of course, enter the same name in both fields. In
our example both
System Name and Local PPP ID are set
to bingo (see page 12).
Select [ SAVE ] to accept the entries and return to the
main menu.
PABX Configuration
You will only need the CM-POTS, Phone 1 and Phone 2
menus from the Setup Tool main page to configure exten-
sion numbers for the POTS ports.
In the [
PABX ] menu you will find all the settings necessary
for configuring the POTS ports and the Remote TAPI.
If you have not connected any analog devices to your
BinGO!, please read on in section
Setting up the LAN In-
terface on page 21.
Initially your BinGO! is factory-configured to route in-
coming phone calls to both POTS ports, i.e. if you con-
nected telephones to both ports, they both will ring. In-
coming data calls will be routed to the
isdnlogin service
(see User’s Guide). You can call one connected phone
from the other by dialling #. For calls to external simply
dial the number you want to reach.
1
☞
☞