27
24E
24E
24E
24E
22H
22H
24E
24E
24E
24E
27
27
27
27
27
27
27
27
1710.0 - 1755.0 MHz
1850.0 - 1910.0 MHz
1850.0 - 1910.0 MHz
1850.0 - 1910.0 MHz
1850.0 - 1910.0 MHz
824.0 - 849.0 MHz
824.0 - 849.0 MHz
1850.0 - 1915.0 MHz
1850.0 - 1915.0 MHz
1850.0 - 1915.0 MHz
1850.0 - 1915.0 MHz
1710.0 - 1755.0 MHz
1710.0 - 1755.0 MHz
1710.0 - 1755.0 MHz
1710.0 - 1755.0 MHz
704.0 - 716.0 MHz
704.0 - 716.0 MHz
777.0 - 787.0 MHz
777.0 - 787.0 MHz
0.202 W
0.224 W
0.224 W
0.219 W
0.217 W
0.228 W
0.224 W
0.221 W
0.217 W
0.216 W
0.217 W
0.226 W
0.222 W
0.222 W
0.224 W
0.22 W
0.216 W
0.229 W
0.224 W
C.3 WLE600VX WLAN Frequency Requirements
This device contains FCC ID: TK4WLE600VX
This device is to be used in mobile configurations and must not be co-located or operated in conjunction with any
other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
For mobile devices in the 2412-2462 MHz, 5.15-5.25 GHz, 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725-5.85 GHz
bands, the maximum gain of a directional antenna must not exceed 6 dBi. If an antenna used has a higher gain than
6 dBi, the peak power spectral density must be reduced by the amount in dB that the antenna gain exceeds 6 dBi.
This device has 10, 20, 40 and 80 MHz bandwidth modes.
The following table shows the output power conducted at the antenna terminal:
FCC Rule Part
Frequency Range
Output
15E
15E
15E
15E
15C
5180.0 - 5240.0 MHz
5260.0 - 5320.0 MHz
5500.0 - 5720.0 MHz
5745.0 - 5825.0 MHz
2412.0 - 2462.0 MHz
0.153 W
0.195 W
0.195 W
0.290 W
0.264 W
FCC Radio information
bintec elmeg GmbH
44
bintec H2 Aut
