Binder KMF 115 Скачать руководство пользователя

Страница: 28 / 99

KMF (E5.2) 06/2014

page 28/99

4.3.2 Manual fresh water supply via external freshwater can (option)

If no house water connection with suitable water is available, you can manually supply water by filling a

freshwater can (option, volume: 20 liters /

0.71

cu.ft.

You can attach the freshwater can on the rear of the

unit or place it next to the unit (chap. 14.7).

To guarantee humidification during 24 hours even at high humidity set-points with manual

water supply, we recommend filling the freshwater can (option) daily at the end of the day.

4.3.3 Connection kit for connecting the unit to the water main

A safety kit against flooding caused by burst water hoses is enclosed with the constant climate chamber.

It consists of the following:

•

Hose burst protection device

•

Hose nozzle with screwing

•

4 hose clamps

•

6m water hose, divisible for the feed hose and drain

Protection principle of hose burst protection:

Whenever a strong water flow of about 18 l / min. occurs, e.g. caused by a burst water hose, a valve au-

tomatically cuts off the water supply, which can be heard as a clicking noise. The water supply now re-

mains shut until it is manually released.

Assembly:

Screw the hose burst protection device onto a water tap with a G¾ inch right turning thread connection.

The connection is self-sealing. Establish the connection between the safety kit and the chamber with a

part of the supplied hose. Protect both ends of the hose by the supplied hose clamps.
We recommend connecting the hose as the last step in order to avoid twisting the hose while screwing on

the safety kit.
Open the water tap slowly in order to avoid actuating the hose burst protection device.

Figure 11: Assembly of the connection kit

Release of the reflux protection device:

In case the burst protection device has interrupted the water supply, first find the reason and remove it as

necessary. Close the water tap. Release the valve by a half left-turn of the upper knurled part. You can

hear the release of the valve as a clicking noise. Tighten the burst protection device against the water tap

by a right turn. Open the water tap slowly afterwards.

Содержание KMF 115




































































































Результаты поиска

Содержание KMF 115

Отзывы:

Похожие инструкции для KMF 115

Бренды по названию

Популярные бренды

Binder KMF 115, Руководство по эксплуатации

Результаты поиска

Содержание KMF 115

Отзывы:

Похожие инструкции для KMF 115

Бренды по названию

Популярные бренды