Press the FUNC and
▲
button
simultaneously and hold for 2 seconds to
enter the Advanced Parameters Adjusting
status.
Press the FUNC button repeatedly until
shifting to the Logical Relation Adjusting
status of the Controlling Ouput .
Adjust the parameter by pressing the
▲
or
▼
button.
27
33 SDV 31
www.binder-es.com
Logical Relation Setting of the Controlling Output
When Logical Relation is set as
Normal
Open
, the Controlling Output works as the
controller runs.
When Logical Relation is set as
Normal
Close
, the Controlling Output doesn't work
as the controller runs.
5. Sensor and Signal Control
