Binder 33 SDV31-L, Руководство по инструкции

Страница: 27 / 42

Startup Delay ( -): The periodof time the controller goes through from receiving a startup
control signal to outputting.
Press the FUNC button and hold for 2
seconds to enter the Basic Parameters
Adjusting status.
Press the FUNC button repeatedly until
shifting to the Startup Delay Time
Adjusting status ( - --- ) as the Startup
Delay Time Indicator on the panel lights
up.
Adjust the parameter by pressing the ▲ or
▼ button. The parameter unit is second,
and the numerical precision is 0.1.
Startup Delay is set as - --- by default.
c. Startup Delay Time and Shutdown Delay Time settings of the NPN
switch sensor
By default, Intelligent Photoelectric Sensor and switch sensor share the same Startup Delay
Time and Shutdown Delay Time. Operators can also set Startup Delay Time and Shutdown
Delay Time independently for the Switch Sensor.
Shutdown Delay (L-): The periodof time the controller goes through from receiving a
shutdown control signal to cutting off output.
Press the FUNC button and hold for 2
seconds to enter the Basic Parameters
Adjusting status.
Press the FUNC button repeatedly until
shifting to the Startup Delay Time Adjusting
status (L-) as the Shutdown Delay Time
Indicator on the panel lights up.
Adjust the parameter by pressing the
▲
or
▼
button. The parameter unit is second, and
the numerical precision is 0.1.
Startup Delay is set as L--- by default.
22
33 SDV 31
www.binder-es.com
5. Sensor and Signal Control