55
Binatone Help: www.meetthebrick.com
TECHNICAL DETAIL
15 TECHNICAL DETAIL
Standard
Digital Enhanced Cordless
Telecommunication (DECT)
Frequency range
1881.7920 MHz (Ch 9) to 1897.3440 MHz (Ch 0)
Channel Width
1.728MHz
Multiple Access
TDMA/FDMA
Operating range
Up to 1000m outdoors; Up to 50m indoors
Operating time
Standby: 200 hours, Talking: 10 hours
Temperature range
Operating 10°C to +40 °C, Storage -20°C to +60 °C
Electrical power
Base unit:
MEIC: MN-A102-U130
Input: 100-240V 50/60Hz 200mA, Output: 6V DC 400mA
Charger unit:
MEIC: MN-A102-U130
Input: 100-240V 50/60Hz 200mA, Output: 6V DC 400mA
Battery Information
Sanik - Rechargeable 2 x 550mAh NIMH Battery
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
Port specification
The
port (connected to the mains power supply) is a SELV port with respect to
EN 60950
The
port (connected to the telephone line) is a TNV port with respect to EN 60950
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners or other solvent
chemicals as this may cause permanent damage which is not covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your phone system away from
hot, humid conditions or strong sunlight, and
don’t let it get wet.
Every effort has been made to ensure high standards of reliability for your phone
system. However, if something does go wrong,
please do not try to repair it
yourself, but consult your supplier or the Helpline.
