51
Binatone Help: www.meetthebrick.com
HELP
13.15 To change the remote access PIN
The default remote access PIN is 0000.
1 Press
Menu
, the display shows
Answer Machine
, press
Select
.
2 Scroll
D
to
Answer Settings
and press
Select
.
3 Scroll
U
or
D
to
Remote Access
and press
Select
.
4 Scroll
U
or
D
to
Set Remote PIN
and press
Select
.
5 Enter the old 4-digit PIN and press
Save
(default setting = 0000).
6 Enter the new 4-digit PIN and press
Save
.
7 Re-enter the new PIN and press
Save
.
8 Press
E
to return to standby.
NOTES
This PIN is different from the System PIN used when resetting the
unit or when registering / de-registering handset.
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
14 HELP
The icon is not scrolling during charge
.
Bad battery contact – move the handset slightly.
.
Dirty contact – Clean the battery contact with a cloth moistened
with alcohol.
.
Battery is full – no need to charge.
No dialling tone
.
No power – check the connections. Reset the phone: unplug
and plug back in the mains.
.
Batteries are empty – charge the batteries for at least 24 hours.
.
You are too far from the base – move closer to the base.
.
Wrong line cable – use the line cable provided.
.
Line adaptor (when needed) is not connected to the line cord –
connect the line adaptor (when needed) to the line cord.
