To de-register a handset
You may need to do this if you need to replace a faulty handset. Call the
Binatone help
line if
To select a base:
1.
P
"PHONEBOOK"
à
2.
P
ress
à
3 times
"HS SETTINGS"
3.
P
à
"ALARM"
4.
P
ress
à
8 times
"SELECT BASE"
5.
P
ress
to confirm, and the display shows the present linked base number,
e.g "BASE 1 +"
6.
Press or
to select which base you want the handset to link
7.
P
ress
to confirm
the base. The display will show "SEARCHING 1" (or 2,3,4) and
P
ress
*
with (BASE 1,2,3,4 or AUTO).
Note: the handset will only link with base numbers followed by a "+".
to go back to
idle mode at any time.
The handset
can be registered to more than one base (up to a maximum of 4), and you can
select which base you want the handset to operate with.
If you select "AUTO" the handset will link with the first of the registered bases that it finds.
there will be a short delay until the handset finds the base and the display returns to idle.
à
à
à
à
ress
OK
ress
OK
OK
OK
1. Press
"PHONEBOOK"
à
2. Press
à
twice
"BS SETTINGS"
3. Press
à
"DELETE HS"
4. Press
à
"PIN ?"
Key in the PIN code (default value is 0000).
5. Press
à
" HS 1 +"
6.
Press
or
to select the handset you want to de-register.
7. Press
to confirm,
and the selected handset will be de-registered.
Press
*
to go back to idle mode at any time
*
When de-registering this way, the handset cannot delete itself, only other handsets.
(The display on the handset that has been deleted will show "UNREGISTERED")
OK
OK
OK
OK
OK
Binatone Help Line - 0845 345 9677
21
you need more advice.
