Binatone BB3200, Руководство пользователя

Страница: 25 / 36

To set up a three-way conference between two handsets and an outside call:
Set up a three-way conference call
2). Press "INTERCOM"
,then key in the number of another handset , and the outside
call will be put on hold.
To register a handset to a new base:
!
The handset(s) supplied with your BB3200 system are already registered
— the first one as handset number 1, the second as number 2...etc
You don’t need to re-register them, unless you have a problem.
To check whether a handset is registered, make sure mains power to the base unit is
switched on and the handset is within range. The handset’s display should show its number,
and the 'signal level' symbol on the display should show three bars. If the display
shows"UNREGISTERED " , you need to re-register the handset using the following process:
10.Handset registration
the handset
(HS1) to connect the three parties together.
You need to operate
the base
and handset together:
1.
On the handset, press
"PHONEBOOK"
à
2. Press
twice à
"REGISTRATION"
3. Press
à
"BASE 1"
If the handset already has a registration to a base there is a "+" on the right side of the
display, and you should choose another base number if you don't want to lose that one.
7.
At the same time, on the base, press and hold page button until the On-Line LED
Flashes.
4. Press to select a base
number (
BASE 1, 2,3 or 4)
5. Press
à
"PIN ?"
(
Key in the 4 digit PIN code for the base -the BB3200 default PIN code is 0000.
)
6.
Press to confirm, and the
display will flash
"SEARCHING 1" (or 2,3,4)
After a short delay, if the registration is successful, there will be a confirmation beep, and
the handset display will go back to idle mode with the new handset number shown
(e.g. HS1, HS2). The base will also go back to idle mode and the LED turns off.
OK
OK
OK
OK
20
1). Either make or answer an outside call with one handset(e.g HS1),
3). When the other handset answers the call, press the STAR (*) button on
4). To end the conference call either handset can press "HANG UP" ,and the other
handset will be left connected to the outside call.