Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t
change the page numbering. Keep the language
integrity.
7
/
16
Assembly page 7/16
Fax +32 030 9904733
USE
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the
power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician
or a person with similar qualifications, in order to avoid any risk.
The thermofan can be used for the only fan function or to heat.
To use the thermofan, please follow the instructions below:
1)
Insert the plug in the current socket.
2)
Turn the thermostat knob clockwise in the position corresponding at the desired temperature : in
the “min” pos. the thermofan is off in normal condition.
3)
To turn on the appliance, turn the selector knob in the position corresponding at the function
requested.
“0” = off “
” = fan
“~” = air warm (1000 W) “
≈
” = air very hot (2000 W)
The light turns on and turns off when the appliance reaches the requested temperature; if the
thermostat is set at the maximum level, the appliance works continuously.
4)
To turn off the fan heater, please turn the Knob in the “0” position and the thermostat knob
anticlockwise. Then pull out the plug from the socket.
When the appliance is not in use for long periods, remove the plug from the wall socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
•
Periodically check that the air-intake grill is not obstructed by fuzz or threads.
•
Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
•
For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
•
A special tool is required to replace the electrical cord: contact an authorized service center, also
for any repairs.
•
If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy and resources. Bear in
mind that: the casing, fan and cover are made of plastic; the electrical wires are copper coated in
rubber. – The electric motor is made of iron and copper. The electrical resistance is made of ceramic
material and iron.
